Windows 8 Command Prompt Commands – Has the support of the audience. We may receive a commission when you make a purchase through links on our site. So you can trust us.
While Windows Settings provides easy access to configure many things, the command line (elevated or otherwise) can be useful in many situations, especially if you know how to use it.
Windows 8 Command Prompt Commands
Sometimes settings can be applied by typing a few characters instead of clicking through a chain of menus, and other times there is no other way to do it via command lines.
How To Use The ‘at’ Command In Windows
We’ve compiled a list of things you can do in the Windows Command Prompt, including some commands everyone should know for general use, advanced commands for tuning or troubleshooting your PC, and lesser-known and less practical Command Prompt features. The following list of tips and tricks is organized from the shortest and most useful to the most complex and dangerous…
Cancels the command you entered and allows you to start typing another while you type
No need to write directory paths first. In addition to being able to copy/paste text and tabs through directories, you can drag and drop a folder directly into the Command Prompt window to automatically add a location.
How To Open The Settings App From The Command Prompt In Windows
The command line used to scale very poorly and display very small text, but now it has been updated to allow zooming like in a web browser. Ctrl + mouse scroll up/down to zoom in and out of text.
For settings that include the ability to change the font, layout, and colors of the command line, as well as options such as a quick edit mode that automatically pastes text from the clipboard when you right-click a window.
Tapping the up and down arrow keys on your keyboard will scroll through the commands you typed previously. Additional keyboard shortcuts:
List Of Console Commands Available In Windows 7 Cmd
Ctrl + M: Enables markup mode, which allows you to move the cursor in all directions using the arrow keys.
Ctrl + C or V: Starting with Windows 10, you can use Ctrl + C and V to copy and paste like anywhere else in the operating system.
Ctrl + Shift + mouse scroll: increase or decrease the transparency of the window (+ and – keys also work)
Fixes: Startup Repair Infinite Loop In Windows 7/8/10
Alt + Enter: Enables full screen mode with no title bar at the top (F11 works like anywhere else in Windows)
– command lists all processes running on the computer, details such as their process ID and memory usage.
There are many ways to create a list of controls on the command line. Here is a single line that includes additional information such as device status and associated driver folder location/filename:
Command Line Cheat Sheet
The function keys (F) at the top of the keyboard are also hotkeys, usually for re-entering previous commands without having to retype them.
Windows Terminal was introduced in a newer version of Windows that can be downloaded for free from the Microsoft Store. Terminal is an updated command line tool that adds a tabbed interface to open multiple command lines, as well as PowerShell, SSH connections, and Windows Subsystem for Linux (WSL), making it a very versatile option for command line users.
Windows Terminal receives frequent updates and support for modern features, such as GPU-accelerated text rendering, paving the way for icon and emoji support, and significantly faster text rendering.
Windows Cmd Commands
Some temporary files on the disk can be deleted with the following commands (/q performs the operation without asking for confirmation, /f overrides the read-only attribute and forces deletion, /s deletes the contents of all subfolders):
If that doesn’t free up enough storage space, here are a few more temp folder locations, and we’ve recently looked at a few ways to free up space in Windows, including command-line methods to disable by running Advanced Disk Cleanup and other hibernation. feature system file (hiberfil.sys).
Opens the Windows on-screen keyboard to the command line, which allows you to press keys instead of typing with the mouse.
How To Boot To Command Prompt In Windows Xp, 7, And 8
The Shutdown command can be used with a variety of shutdown, restart, and other toggles, including forcing apps to close, displaying a shutdown message, and specifying the number of seconds before the action takes place. . For example:
If your network adapter supports this feature, you can configure your computer as a wireless access point from the command line.
You may also need to browse through some GUI menus to enable connection sharing (we couldn’t find a way to do this from the command line): Network and Sharing > Change Adapter Settings (
Powershell Vs Command Prompt: Pros And Cons
Right-click on the device connected to the Internet (if it is listed, not the new hotspot) and open
If you have connection problems, try some more complex commands. If there are manual settings, especially when resetting TCP/IP and Windows firewall, network adapter etc. Note that reconfiguration may be required.
You can see “reboot and select correct boot device?” do you get the message? or “no NTLDR” when starting the computer? The method below worked for me to fix my Windows 8 device and should work on other versions of Windows as well.
Here Are The Commonly Used Windows Command Prompt Commands For Power Users
Note that you must enter these lines at a command prompt opened in a recovery environment outside the operating system, for example, from a bootable USB drive containing Windows 10/Windows 11 installation media.
While this sequence has worked for us in the past, we tested it in a virtual machine by deleting the system-stored partition (where the boot information is stored) and trying to restore the boot state by entering the provided paths. Unfortunately, access has been denied
However, these bcdboot and bootsect commands allowed us to reboot Windows even though we had just formatted the system partition:
Manual Reset Update Components/update Faliure/windows 8
From the recovery console outside of a Windows installation (eg Windows 11 installation media), C:Windows is D:Windows (your operating system) and C: is the system partition (boot data). Entrance
To close the disk partition). If you want to run bcdboot from the recovery environment, you want something like this:
Still can’t start Windows? Have a blue screen or other error? The operating system has built-in tools for finding and replacing damaged system files:
Windows 8 Cheat Sheet
Files and folders can be encrypted or zipped, then decrypted and decrypted using individual hotkeys for each – just make sure you change the target item:
The topic is discussed in the excellent Super User thread, which offers variations of the same command that allow you to back up key files, copy files from one location to another, but only when changes are made.
These reports are surprisingly detailed and can help you understand issues with system power consumption or wireless connectivity.
Offline Activate The Built In Administrator On Windows 10 Without Signing In
(Creating a report on the energy efficiency of the system – the location of the report is shown after the command)
(Generate a report with battery specs and statistics and battery usage history graphs)
Various old telnet services are still available, including the ability to watch Star Wars Episode IV.
Cool Command Line Tricks For Windows And Macos
Note: If the command is not recognized, you may need to enable telnet. Find Start or Control Panel and check the box next to “Turn Windows features on or off” and Telnet (click OK…).
Note: This feature was published in October 2018. As part of our #ThrowbackThursday initiative, we’ve edited some of its content to give it an old-school feel.
If you like our content, please consider subscribing. An ad-free experience to support our work Our promise: All reader contributions are funded by more content. This means: More technical features, more benchmarks and analysis. Windows has been stable and user-friendly for years. Every command, almost everything, is directly accessible to users through the Windows Explorer interface that users are used to seeing every day. When you look at your hard drive or even look at the System Information menu, it’s all Windows Explorer. Windows didn’t always look like this, but PC users today had to dive into a screen and type in functions to do what they wanted, removing all the user interfaces we love. In Windows 8.1, it is called Command Prompt.
How To Change Colours In Command Prompt In Windows?
Press the Windows key on your device’s keyboard to go to the Start screen. Tablet and 2-in-1 users can also press the Windows button directly below the device screen.
Place the mouse pointer in the upper right corner of the screen, the Balloons panel will appear, then click or Search. Touch users can place their finger on the right side of the screen, swipe left to reveal the Balloons bar, then tap Search.
In the search field located in the context menu on the right, type Command line. Make sure you have typed the phrase correctly in the search field and press Enter or the search key. Tap users need to tap to search